Estimate Request

(587) 206-3388
Heat Where You Need It

Warm the Cold Corners of the House With a Hearth That Works

Many houses have one room that never quite warms up: the basement den, the sunroom, the addition at the back. A fireplace or gas insert can take the chill off that space without asking the furnace to work harder. Chimney Sweep Edmonton helps these hearths pull their weight with Chimney Cleaning for wood units and Gas Fireplace Maintenance for gas ones. A clear flue and a tuned burner mean more of the fuel turns into usable warmth. In Edmonton, a dependable fireplace in the chilly room is a small luxury that is easy to look after.

About Chimney Sweep Edmonton
Chimney Care Close BySweeps, Caps and Liners

Open Flues for Steadier Fires

Removing soot and checking the damper helps a wood fire draw evenly, so the room warms steadily instead of in short, smoky bursts.

Gas Inserts Tuned for Heat Output

Burner cleaned, blower checked where one is fitted and flame pattern confirmed, so an insert in a chilly room delivers the warmth it was built to give.

Why Choose Chimney Sweep Edmonton
Out of Sight

Some Important Parts of an Insert Sit Out of Sight

Connection Examined

Where the insert meets its liner is a common weak spot. When practical, we look at the joint to confirm it is snug and free of gaps.

The Old Firebox Checked

Behind or beneath the unit, the original masonry can hide soot, damaged mortar or debris. We take a look so nothing is forgotten back there.

Surround and Gaps Reviewed

Trim, panels and the space around the unit are checked for gaps and heat marks, which help explain how the insert is performing.

Our Specialties

Hearth Care for Homes in Edmonton

See Every Service   |
Chimney Cleaning

Chimney Cleaning

Less smoky smell, steadier flames: Chimney Cleaning around Edmonton

Chimney Sweep

Chimney Sweep

Creosote cleared, flue inspected: Chimney Sweep for Edmonton

Chimney Sweep Services
Fireplace Experts

Fireplace Experts

Before relighting in Edmonton, a visit from Fireplace Experts

Gas Fireplace Maintenance

Gas Fireplace Maintenance

Burner ports, pilot hood, glass: Gas Fireplace Maintenance around Edmonton

Condos and Townhouses

Gas Fireplaces in Condos and Townhouses, by Make

Testimonials

What Homeowners in Edmonton Say About Us

Hear from homeowners in Edmonton about how Chimney Sweep Edmonton transformed their chimney and fireplace experience with reliable, professional services you can trust.

We kept finding damp patches in the attic near the chimney chase and could not figure out where the water was getting in. Chimney Sweep Edmonton went up and found the concrete crown had cracked in several places, letting meltwater seep straight down between the flue and the masonry at our home in Highlands. They ground out the damaged crown, poured a new one with a proper overhang and drip edge, and sealed it with a flexible coating. We have been through two heavy thaws since and the attic has stayed bone dry.

Margaux Deschamps

Highlands, Edmonton, Alberta, Canada

The damper in our old fireplace had rusted so badly it was frozen half open, so we were losing heated air up the flue all winter long. Chimney Sweep Edmonton removed the seized plate, cleaned out decades of rust and grit from the frame, and installed a new damper that seals tight when closed. The technician showed me how smoothly it operates and explained how much heat we had likely been losing. Our furnace runs noticeably less now, and the living room no longer feels drafty at our place in Strathcona.

Dmitri Kovalenko

Strathcona, Edmonton, Alberta, Canada

A family of squirrels had moved into our chimney in early spring, and the scratching sounds at night were driving us crazy. Chimney Sweep Edmonton confirmed the nest with a camera, waited until the animals had been humanely removed, then cleared out an alarming amount of nesting material packed into the flue at our house in Capilano. They finished by installing a solid stainless cap with mesh sides so nothing can get back in. The chimney drafts properly again and the house is finally quiet.

Nadia Osei

Capilano, Edmonton, Alberta, Canada

The mortar joints on the upper half of our chimney had crumbled to the point where I could scrape them out with a finger. Chimney Sweep Edmonton assessed the stack at our home in Pleasantview and recommended full repointing before winter rather than a patch job. They ground the failed joints back to solid mortar, repacked everything with a mix matched to the original, and struck the joints to blend with the existing brickwork. The chimney looks sharp again and there is no more sand washing down the roof after every rain.

Callum Ferguson

Pleasantview, Edmonton, Alberta, Canada

A brown water stain kept spreading across our ceiling right beside the chimney, and a roofer told us the shingles were fine. Chimney Sweep Edmonton inspected the base of the stack and found the flashing had pulled away from the brick, leaving a gap that funneled water inside every time it rained. They fabricated new step flashing, embedded the counterflashing into a fresh mortar joint, and sealed the transition completely. We repainted the ceiling weeks ago and the stain has never come back.

Veronique Allard

Allendale, Edmonton, Alberta, Canada

The glass on our gas fireplace had fogged up with a white film and the flames had turned lazy and orange instead of crisp blue. Chimney Sweep Edmonton pulled the unit apart at our place in Forest Heights, cleaned the burner and pilot assembly, adjusted the air shutter, and polished the deposits off the glass with the proper cleaner. They also checked the venting to make sure nothing was restricted. It burns clean and bright now, and the glass has stayed perfectly clear since the visit.

Jasdeep Grewal

Forest Heights, Edmonton, Alberta, Canada
Start Here

Share a Few Details for a Quote

Open Masonry Fireplaces

The classic wide opening needs a good damper, a sound smoke shelf and a screen that catches sparks.

See-Through Units

Fireplaces open on two sides share one flue, so glass, doors and seals on both faces get the same attention.

Corner Fireplaces

Angled firebox walls and tight corners hold soot in odd places, which we reach with shaped brushes and a good light.

Raised Hearths

A firebox set above floor level changes how ash is handled and how heat reaches the room, and we adjust our approach to suit.

Wall-Mounted Gas Units

Slim units set into a wall depend on tidy venting and clean glass, so we check both with care for the finish around them.

Stone-Faced Surrounds

Heavy stone around the opening hides soot lines and mortar changes, so we take care cleaning the surface and note any cracking.

Handy Rules of Thumb

Rules of Thumb for Fireplaces, Stoves and Chimneys

Every trade has shortcuts that experienced people lean on, and chimney work is no different. The answers below pass along the useful ones, along with the reasons behind them so you know when a shortcut stops applying. Rules of thumb are a starting point, so for your own house in Edmonton a proper look is still the final word.

A unit with a thermostat cycles on and off to hold the room at a set temperature, which is normal. Other causes are weak batteries, a pilot that keeps going out or a safety switch tripping because of blocked venting or overheating. Note how long it runs before it shuts off and whether the glass or the surrounding area gets very hot. That detail helps the technician diagnose it. Do not bypass safety controls.

A visible gap between the chimney and the wall can mean the chimney foundation has settled, and it deserves a prompt look. A small seasonal change in width may be expansion and contraction, but a gap that is growing, along with cracks in the brick or interior walls, points to movement. Take dated photos, stop using the fireplace if the gap is large and ask a masonry specialist or structural expert to examine it.

Sometimes, but it is not a first move. A smoky fireplace more often has a cause such as a blocked flue, a closed damper, a tight house or a chimney that is too short, and those are better handled directly. A fan masks the symptom and adds a part that can fail. Many open masonry fireplaces are not designed for one. Ask for the cause to be found before you spend on equipment.

It usually means the inspector saw something worth a closer look but is not a chimney specialist and could not see inside the flue. Common triggers are cracks, missing liner sections or heavy staining. A chimney inspection, often with a camera, gives a clear picture and a written list of what needs work. Share the report with the technician so they know what prompted the note.

They matter a great deal, because the smoke that such rules aim at mostly comes from smoldering, oxygen-starved fires and wet wood. Burn dry, seasoned hardwood, build a small hot fire and keep the air supply open long enough for the wood to burn cleanly. If the chimney smoke is dark or hangs low well after the first few minutes, something needs adjusting, whether it is the wood, the air or the stove.

Brushing a sound clay tile is routine and does not hurt it. Tiles that are already cracked, loose or crumbling can shift or break under pressure, which is why a technician often looks at the flue before cleaning it. If the tile is in poor condition, a camera inspection and a plan for relining come before heavy brushing.
Rules of Thumb for Fireplaces, Stoves and Chimneys

Need More Answers?

Just ask our crew.

(587) 206-3388 Send a Question
On the Map

Where We Show Up

Edmonton, AB

Message Our Team

Add your address so we can line up the closest open time.